headerpos: 9507
 
 
  Estonian Journal of Engineering

ISSN 1736-7522 (electronic)  ISSN 1736-6038  (print)

 An international scientific journal
Formerly: Proceedings of the Estonian Academy of Sciences Engineering
(ISSN 1406-0175)
Published since 1995

Estonian Journal of Engineering

ISSN 1736-7522 (electronic)  ISSN 1736-6038  (print)

 An international scientific journal
Formerly: Proceedings of the Estonian Academy of Sciences Engineering
(ISSN 1406-0175)
Published since 1995

Publisher
Journal Information
» Abstracting/Indexing
List of Issues
» 2013
» 2012
» 2011
» 2010
» 2009
Vol. 15, Issue 4
Vol. 15, Issue 3
Vol. 15, Issue 2
Vol. 15, Issue 1
» 2008
» 2007
» Back Issues
» Back issues (full texts)
  in Google
Publisher
» Other Journals
» Staff

Scuffing resistance of DLC-coated gears lubricated with ecological oil; pp. 367–373

(Full article in PDF format) doi: 10.3176/eng.2009.4.14


Authors

Remigiusz Michalczewski, Witold Piekoszewski, Marian Szczerek, Waldemar Tuszynski

Abstract

This research was aimed to the elaboration of a new technology for heavy-loaded machine elements, lubricated with ecological oils without or with very limited amount of usually harmful AW/EP additives used in gear oils. The main objective of the study was the investigation of the effect of DLC coatings on scuffing resistance of coated gears. Three kinds of DLC coatings were tested: a-C:H:W, a-C:Cr and a-C:H. The gear tests were preformed using FZG A/8.3/90 method, employing the T-12U gear testing rig. The gears were lubricated with eco-oil. For the a-C:H:W coated gears, lubricated with ecological oil, the oil temperature was lower by 20 °C, and the friction was lowered by 20% compared with uncoated steel gears, lubricated with high-performance GL-5 gear oil. Thus it has been shown here that under extreme pressure conditions low friction coatings can take over the functions of AW/EP additives and make it possible to use ecological oils for lubrication.

Keywords

DLC coatings, gear test rig, scuffing, ecolubricants.

References

 1. Michalczewski , R. Tribological Investigations of the Elements with Anti-wear Coatings in Lubricated Non-conformal Contacts. PhD Thesis. Technical University Lodz , 2002.

  2. Hurasky-Schonwerth , O. , Weck , M. , Spechtel , B. and Krell , M. Coated gearings and bearings optimised for environmentally acceptable lubricants. In Proc. 13th International Colloquium Tribology. Esslingen , Germany , 2002 , 1787–1796.

  3. Erdemir , A. The role of hydrogen in tribological properties of diamond-like carbon films. Surface Coatings Technol. , 2001 , 146–147 , 292–297.
doi:10.1016/S0257-8972(01)01417-7

  4. Michalczewski , R. and Piekoszewski , W. Wear and friction of low friction coatings in dry conditions. Tribologia (Finnish Journal of Tribology) , 2007 , 26(3) , 9–21.

  5. Wänstrand , O. Wear Resistance of Low Friction Coatings for Machine Elements. PhD Thesis. Acta Universitatis Upsaliensis , Uppsala , 2000.

  6. Vercammen , K. , Haefke , H. , Gerbig , Y. , Van Hulsel , A. , Pfluger , E. and Meneve , J. A comparative study of state-of-the-art diamond-like carbon films. Surface Coatings Technol. , 2000 , 133–134 , 466–472.
doi:10.1016/S0257-8972(00)00925-7

  7. Podgornik , B. Coated machine elements – fiction or reality? Surface Coatings Technol. , 2001 , 146–147 , 318–323.
doi:10.1016/S0257-8972(01)01400-1

  8. Michalczewski , R. , Szczerek , M. , Tuszynski , W. and Wulczyński , J. A method for selection of wear resistant , hard , thin coatings to increase life of highly loaded gears. Part II. Results of gear tests. Tribologia (Poland) , 2007 , 38(6) , 133–149.

  9. Hedenqvist , P. and Hansson , G. PVD-coating of machine components. In Proc. 8th Inter­national Conference in Tribology NORDTRIB ’98. Ebeltoft , Denmark , 1998 , 943–948.

10. Vetter , J. , Barbezat , G. , Crummenauer , J. and Avissar , J. Surface treatment selections for automotive applications. Surface Coatings Technol. , 2005 , 200 , 1962–1968.
doi:10.1016/j.surfcoat.2005.08.011

11. Joachim , F. Influence of coatings and surface improvements on the lifetime of gears. In Proc. COST 532 Conference , Triboscience and Tribotechnology. Gent , Belgium , 2004 , 138–147.

12. Krantz , T. L. , Cooper , C. V. , Townsend , D. P. and Hansen , B. D. Increased Surface Fatigue Lives of Spur Gears by Application of a Coating. Report NASA/TM-2003-212463 , 2003.

13. Michalczewski , R. , Piekoszewski , W. , Szczerek , M. and Tuszynski , W. Tribological charac­teristics of highly-loaded coated contacts lubricated with environmentally acceptable oils. Tribologia (Poland) , 2004 , 35(6) , 7–19.

14. Podgornik , B. , Jacobson , S. and Hogmark , S. Influence of EP and AW additives on the tribological behaviour of hard low friction coatings. Surface Coatings Technol. , 2003 , 165 , 168–175.
doi:10.1016/S0257-8972(02)00766-1

15. Stavlid , N. On the Formation of Low-friction Tribofilms in Me DLC Steel Sliding Contacts. PhD Thesis. Acta Universitatis Upsaliensis , Uppsala , 2006.

16. Kalin , M. and Vižintin , J. A comparison of the tribological behaviour of steel/steel , steel/DLC and DLC/DLC contacts when lubricated with mineral and biodegradable oils. In Proc. 11th Nordic Symposium on Tribology. Tromsø , Harstad , Hurtigruten , Norway , 2004 , 549–564.

17. Beckers , M. , Lugscheider , E. , Bobzin , K. and Burckhardt , M. Development and charac­terisa­tion of innovative PVD-coatings for environmental compatible tribological systems. In Proc. 13th International Colloquium Tribology. Esslingen , Germany , 2002 , 1765–1773.

18. Jiang , J. C. , Meng , W. J. , Evans , A. G. and Cooper , C. V. Structure and mechanics of W-DLC coated spur gears. Surface Coatings Technol. , 2003 , 176 , 50–56.
doi:10.1016/S0257-8972(03)00445-6

19. Stallard , J. and Teer , D. G. A study of the tribological behaviour of CrN , Graphit-iC and Dymon-iC coatings under oil lubrication. Surface Coatings Technol. , 2004 , 188–189 , 525–529.
doi:10.1016/j.surfcoat.2004.07.078

20. DIN 51 354. Teil 2. FZG - Zahnrad - Verspannungs - Prüfmaschine. Prüfverfahren A/8 ,3/90 für Schmieröle.

21. IP 334/86. Load-carrying capacity tests for oils (FZG gear machine).
 
Back

Current Issue: Vol. 19, Issue 4, 2013





Publishing schedule:
No. 1: 20 March
No. 2: 20 June
No. 3: 20 September
No. 4: 20 December